SAMPLE LOGS
MAX TEMPERATURE
350°F (175 °C)
MAX PRESSURE
20,000 psi (140.4 MPa)
NOMINAL OD
3-1/2” (89 mm)
TOOL OD
4.9” (125 mm)
MAX OD
6.1” (155 mm)
R/A LOGGING SPEED
30 ft/min (550 m/h)
SGR LOGGING SPEED
10 ft/min (180 m/h)
COMMUNICATION
BIDIRECTIONAL
TENSILE STRENGTH
66,150 Ibf (30,005 kgf)
OPERATING VOLTAGE
180±10VAC, 50±Hz
HOUSING
Stainless steel and titanium alloy
ACE-5000 platform can complete such logging services as Electrical Survey, Dual Laterolog, Dual Induction Focused Log, Array Induction, Compensated Acoustic Log, High Resolution Acoustic Log, Dipole Acoustic Log, Cross-Dipole Acoustic Log, Cement Bond Log, Micro-spherical Focused Log, Micro-log (2” normal and 1,5” lateral), 4-Arm Caliper Log, Gamma and/or Spectra Gamma Log, Compensated Neutron Log, Compensated Density and/or Spectral-Density Log, Continuous Deviation and Orientation Log, and High Resolution Six Arm Dipmeter.
Auxiliary services measurements like Head-Tension/Compression, Mud Resistivity and Borehole Temperature are available during logging of any services. Rotary Subs, Centralizers and Flexible Coupling Subs are offered to help improve reliability of readings of well-face pushed tools and also to help diminish the chances of the Downhole Logging String or the Electrical Wireline Cable to become stuck. The tools can be conveyed, on Pipe or Coil Tubing, into wells where the trajectory is deviated or extended beyond the reach of conventional Electric Wireline cables.
Real-time acquisition is done with the Warrior Surface Acquisition Logging System which gives out B/W and/or Color field prints with raw and calibrated data curves, and digital data in standard logging formats. Full petrophysical and saturation analysis is available as 7d x 24h worldwide coverage remote services, centralized at Hotwell Log Analysis Center located at headquarter in Klingenbach, Austria.
System Characteristics
Downhole tools and subs functions are highly integrated. This is a complete and conventional logging string including resistivity, micro-resistivity, gamma ray, density, neutron, caliper and acoustic services results in a tool string length of just 20 meter (running Laterolog + add 15 meter bridle) or 23 meter (running Dual Induction), this add for time efficiency in rig-up/rig-down maneuvers. Each instrument’s digital interface adopts a software-based intelligent processing mode, greatly improving sensitivities and reliability of the Instruments. Downhole tools use a standard communication bus that provides the platform with a very high expandability potential; the tool designs are structurally optimized and have very convenient connections.
Note: ACE-1000 tools and ACE-5000 tools are neither compatible nor combinable in between both platforms.